GFS Sludge Holding Tanks For Wastewater Treatment Plant

 GFS Sludge Holding Tanks For Wastewater Treatment Plant

 

Product introduction

GFS sludge holding tanks with over 30 years lifespan is called glass fused steel tank,which consists of Glass-Fused-to-Steel, special sealant, self-locking bolts. The glass fused steel tank is bolted type. Factory fabricated steel panels are bolted together by high-grade bolts and sealed by silicone sealant. The glass fused steel tank is gas and liquid impermeable. When making the installation, it is usually assembled from top to bottom, which the top rings is firstly connected and then next ring... Till the bottom ring. Lifting system like jacks or steel poles is used to lift the tanks which give access to workers to assembly the next rings. The glass-lined steel sludge holding tanks are widely used in the wastewater treatment plant.



 

We can provide glass fused steel floor too. In most cases, a concrete foundation is applied and the tank wall is connected with the concrete floor. You don’t have to worry about the leakage of the foundation because

we have built hundreds of such tanks.

 

GFS Sludge Holding Tanks Specifications

 

 

Coating colordark blue, dark green , white, and customized
A standard steel plate sizeeffective size 2400mm x 1200 m
Steel plates thickness3mm - 12mm , depends on the diameter & height
Coating thickness0.25mm - 0.4mm, two coating internal and external
Acid and alkalinity proofstandard coating suits for PH3 - PH11, special coating suits for PH1 - PH14
Adhesion3,450N/cm
Elasticsame as steel sheet , around 500KN/mm
Hardness6.0 Mohs
Service life>30 years
Spark test>1500 V
Permeabilitygas and liquid impermeable
Easy yo cleansmooth, glossy, inert, anti-adhesion
Corrosion resistance

excellent ! Suitable for waste water salt water, sea water, high sulfur crude oil, salt fox, organic and inorganic compounds

 

 

GFS Sludge Holding Tanks Manufacturer

 

Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2020, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 80 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.

Glass Fused to Steel Tanks

  • Aluminum Geodesic Dome Roofs
  • Stainless Steel Bolted Tanks Glass Lined Steel Tanks Bolted Steel Tanks Biogas Storage Tanks Drinking Water Tanks Agricultural Water Tanks Dry Bulk Storage Tanks Potable Water Tanks Process Water Tanks Wastewater Tanks Anaerobic Digesters Leachate Tanks Municipal Sewage Tanks Fire Water Tanks Industrial Water Tanks Grain Storage Silos Agricultural Silos Liquid Storage Tanks Fire Sprinkler Water Tanks Industrial Liquid Tanks China Storage Tanks Manufacturer China Stainless Steel Water Tanks Manufacturer

    评论

    此博客中的热门博文

    Meeting the Highest Standards: Shijiazhuang Zhengzhong Technology Co., Ltd’s Glass-Fused-to-Steel Tanks Comply with AWWA D103

    Utilizing Quality Glass-Fused-to-Steel tanks as wastewater treatment process tanks

    Porcelain Enamel Liquid Storage Tank for Industrial wastewater storage